When choosing safety shoes, you must pay attention to the following points:
1. Check the upper of safety shoes and the materials in the shoes. The leather of the high-quality safety shoes is delicate and bright. The main parts have no color difference and no disability. The leather surface of the back part will not be loose when pressed by the fingers. The inner material of the shoes should also be natural leather.
2. Check the soles of safety shoes. Gently press the soles of your feet with your nails. High-quality soles are elastic, soft and hard, and will not fall off.
3. Check the heel. Safety shoes can be placed flat on the counter. High-quality shoes should be stable, the heels of the feet should be in contact with the work surface, and the heels of the same pair of shoes should have the same height.
4., check the shank. The shank is a key part that is installed between the outsole and the inner midsole of the leather shoe to support the shaping. Place the shoe flat on a firm table and press the shank hard. The qualified shoe should not be soft or deformed.
5. Check the main heel and toe cap of safety shoes. The main heel is the key component of the rear shoe upper and is installed between the shoe upper and the upper. The toe is an integral part of the toe and is installed between the toe and the upper. During the inspection, you can press the main heel and toe cap with your fingers. High-quality shoes should be able to withstand the pressure. Put on safety shoes and check if the installation position is correct. If you can directly touch the main heel and toe cap materials, it means that the process is unreasonable.
